• O que é um serviço de levantamento topográfico de sistemas solares?
  • O que é um serviço de levantamento topográfico de sistemas solares?
  • On-site solar system survey service — Mars Solar engineers assessing rooftop PV array, load profile and shading before design

Tubo de etiqueta
15 de julho de 2025

O que é um levantamento de um sistema solar no local?

  An levantamento do sistema solar no local is the first step every serious project takes. More and more factory owners, hotel owners, school committees, and hospital boards come to Mars Solar for solar system solutions. Because their sites are in urgent need of stable, clean and durable power energy.

           Como fabricante e engenheira profissional de sistemas de geração de energia solar, a Mas Solar não só produz seus próprios sistemas, como também oferece serviços de projeto, instalação e outros serviços de engenharia para projetos de energia solar de seus clientes. Após o início de um projeto de sistema de geração de energia solar, o primeiro passo é realizar um levantamento do local de instalação.

           Como são os serviços de levantamento topográfico da Mas Solar? O relatório de levantamento a seguir é emitido pelo engenheiro de levantamento topográfico da Mas Solar após a conclusão do serviço:

O que é um serviço de levantamento topográfico de sistemas solares?
Se você tem um projeto de sistema de geração de energia solar prestes a começar, entre em contato conosco para obter mais suporte!

On-Site Solar System Survey: What Engineers Actually Check

An levantamento do sistema solar no local answers the questions a satellite image cannot. Roof orientation and pitch can be estimated remotely, but structural capacity, shading from neighbouring buildings, existing board capacity and cable routes cannot. An levantamento do sistema solar no local is what turns a quotation from an estimate into a commitment.

Our engineers measure available area, confirm the roof can carry the added dead load plus wind uplift, log shading across the day, and inspect the main distribution board for spare ways and rating.

Why an On-Site Solar System Survey Prevents Cost Overruns

Most solar projects overrun for reasons that a levantamento do sistema solar no local would have caught: a roof that needs strengthening, a board with no spare capacity, or a cable route that is twice the assumed length. Each of those is cheap to design around and expensive to discover mid-installation.

The survey also fixes the mounting method. Ballasted flat-roof mounting, pitched-roof rail fixing and ground-mount frames have very different costs and very different structural implications, and only a site visit settles which applies.

What You Receive After the Survey

After an levantamento do sistema solar no local we deliver a shaded site plan, a structural note, a single-line diagram of the proposed electrical connection, and a firm quotation with a stated generation estimate rather than a best-case figure.

Surveys are free for commercial and industrial projects in our target markets. To arrange one, see our contact page, or review the systems we survey for on the sistema solar para fábrica e sistema de energia solar para hotéis pages. The U.S. Department of Energy's Gabinete de Tecnologias de Energia Solar explains the assessment standards behind these checks.

Perguntas frequentes

What is an on-site solar system survey?
A site visit where our engineers measure the roof or ground area, check the structure, shade, cable routes and the existing distribution board, so the system is sized from measured data instead of assumptions. It takes one to two days on a commercial site.
Do I need an on-site solar system survey before ordering?
For rooftop and ground-mount commercial projects, yes. Panel layout, mounting type and cable lengths all depend on it. For a standard containerised or skid-mounted unit, a drawing set and a load list are usually enough.
What does the survey report include?
Measured and usable area, structural notes, a shading assessment, the proposed array layout, inverter and battery location, cable route and lengths, and a single-line diagram.
How long does a survey take?
One to two days on site for a commercial facility, plus three to five working days for the report and layout drawings.
Does Mars Solar send engineers or a local partner?
Either. We have 30+ engineers and work with commissioning partners across 130+ countries, so the survey is done by whoever can reach the site fastest.
What should I prepare before the survey team arrives?
Roof or site drawings, twelve months of electricity bills, the electrical single-line diagram, access arrangements and a site contact. These items remove most of the back-and-forth.