Sistema solar para fábrica

A sistema solar para una fábrica has to do more than cut an electricity bill - it must protect production. Motor starts, welding sets, compressors and CNC lines create surge loads and power-quality events that a domestic system cannot absorb. A sistema solar para una fábrica is designed around the load profile of the plant, not around a nameplate rating.

In Nigeria, Ghana and Kenya, where grid interruptions stop a shift mid-run, the storage component matters as much as the PV array. Our sistema solar de una fábrica de galvanoplastia case explains how that is engineered.

We start with 7 to 14 days of logged consumption, split base load from shift peaks, and size the PV array on daytime energy while sizing the battery on the evening block. A plant consuming 900kWh a day with a 400kWh daytime share needs roughly 100kWp of PV plus a storage bank covering the remaining 500kWh.

Inverter selection follows the surge profile. Three-phase machinery with 3x inrush needs a bidirectional inverter rated for that surge, which is why we specify an Sistema de almacenamiento de energía en batería (BESS) de 125 kW rather than stacking single-phase units.

Send the motor list and twelve months of bills, and your sistema solar para una fábrica proposal comes back with a sized PV array, inverter rating and battery capacity.

A complete sistema solar para una fábrica from Mars Solar includes PV modules, mounting structure, DC and AC protection, hybrid or bidirectional inverters, LiFePO4 storage, cable, MC4 connectors and a monitoring gateway. Everything is matched and factory-tested as one system.

Storage modules are rack-mounted for serviceability, as shown on our batería de almacenamiento de energía montada en bastidor page. For plants with a heavy overnight load, see the Caso práctico de una instalación solar industrial de 2 MW.

A sistema solar para una fábrica rooftops and yards is only as good as the load data behind it; every sistema solar para una fábrica we ship is sized from logged consumption, not from a template.

Mars Solar exports industrial systems directly, so a sistema solar para una fábrica is priced at factory level without distributor margin. Systems are certified to CE, RoHS, TUV and ISO standards, with a 10-year battery warranty and 5-year inverter warranty.

Model the investment with our storage cost guide, and see commissioning practice in our Sudan microgrid build.

Industrial energy is the largest single category of global demand. The U.S. Department of Energy's Oficina de Tecnologías de Energía Solar explains how on-site generation cuts both cost and carbon for manufacturing - a solar system for factory is a cost-reduction measure before it is an environmental one.

Preguntas frecuentes

How is a solar system for factory sized?

We start with 7 to 14 days of logged consumption, split base load from shift peaks, and size the PV array on daytime energy while sizing the battery on the evening block. A plant consuming 900kWh a day with a 400kWh daytime share needs roughly 100kWp of PV plus a storage bank covering the remaining 500kWh.

What should buyers check before ordering a solar system for factory?

Mars Solar exports industrial systems directly, so a solar system for factory is priced at factory level without distributor margin. Systems are certified to CE, RoHS, TUV and ISO standards, with a 10-year battery warranty and 5-year inverter warranty.

Worked example for sizing discussion, not a project measurement. A plant consuming about 900 kWh a day with a 400 kWh daytime share, served by 100 kWp of PV (about 450 kWh a day) and a storage bank carrying the remaining 500 kWh outside the solar window.

Reading the day: about 385 kWh is consumed at the moment it is generated, and roughly 500 kWh falls outside the solar window and is carried by the storage bank, with the grid or a generator as backstop. The 65 kWh of midday surplus is captured rather than exported. The 06:00–08:00 block is the hard one — motor inrush is a power problem measured in kW, not an energy problem measured in kWh, so it sets the inverter rating rather than the battery size.

kW is power; kWh is energy. Three-phase machinery with 3× inrush current is a kW problem: the bidirectional inverter has to be rated for that surge, which is why we specify a single industrial BESS rather than stacking single-phase units. The 900 kWh the plant uses in a day is a kWh problem: it sets the array size and the storage bank. Adding motor nameplate ratings together answers neither question.

Whole-site backup versus critical-load backup. Whole-site backup keeps every line running through an outage and needs a battery sized to full-shift power — typically two to three times the storage cost. Critical-load backup keeps only the line that cannot stop: the continuous process, the cold store, control and safety systems, and lighting. The deciding input is permitted downtime. A plant that can ride through 20 minutes needs far less battery than one that cannot lose a second, and that answer belongs in the specification before anyone prices the storage.

Shift load — how many shifts, and the kW and kWh of each. Three-phase motor list — rating, quantity and starting method: direct-on-line, star-delta or variable-frequency drive. Critical production line — which line cannot stop, and what it draws. Permitted downtime — seconds, minutes, or until the end of the shift. Expansion allowance — whether a line is added in the next two to three years, so inverter and distribution capacity are reserved now. Roof condition — structure, orientation, usable area, and any corrosion, dust or heat that the equipment has to live with. We start from 7–14 days of logged consumption and split base load from shift peaks before anything is specified.